As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.
High-Gloss Sealer is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish, eliminating conventional two-step methods utilising a sealer and finish. High Gloss Sealer allows moisture vapor transmission and is unaffected by ultra-violet light.
Unsealed, textured natural stone, textured porcelain tiles, clay pavers including Saltillo, terra-cotta and adobe, cement tile, quarry. Internal use only.
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Surface should be dry, clean and free of waxes, sealers, or finishes. Do not apply directly over silicone sealers, oil or wax based finishes. Aqua Mix® Sealer & Coating Remover will strip the surface and remove wax or old acrylic finishes. Place a few drops of water on various tiles. If water doesn’t penetrate, additional removal is necessary. New installations need to be dry at least 48 hours before application. Clay and Saltillo tile may require extended drying time depending on temperature and humidity. Make sure the tiles are completely dry before application. Test product in an inconspicuous area to ensure desirable results.
Read entire label before using. For new installations sealer can be applied as soon as 48 hours after grouting. Surface must be clean, dry and free of existing sealers and coatings. Apply 2-3 coats of sealer with a clean dense sponge, brush or paint pad applicator in thin, even coats. Allow 30 minutes drying time between coats. Avoid puddling.
The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application.
Apply over clean stone or tile a minimum of 2 hours prior to grouting – follow application procedures above.
Clean tools with mineral spirits immediately after use
Maximum VOCs: 51 grams per litre
Aqua Mix® AquaShield™ Cleaner & Resealer is a ready to use routine cleaner and re-sealer, tops up natural stone and tiles with a high quality penetrating sealer as it cleans. Safe non-acidic pH neutral formula. Excellent routine cleaner for all natural stone countertops, splashback & showers.
All Natural stone (such as granite, limestone, marble, slate, terrazzo, bluestone/basalt, and travertine), ceramic, porcelain, grout, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, cement encaustic tiles and other water-safe surfaces.
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling the product. Read entire label before using. Household gloves should be worn during application. Spray directly on soiled area and wipe using a sponge or soft white cloth. For tough soils, wait several minutes before wiping. Heavy buildup may require scrubbing with a white nylon pad. To remove heavy buildup, including acrylic and wax floor finishes, use Aqua Mix® HeavyDuty Tile & Grout Cleaner.