Having more than 20 years of experience in the stone industry, MB Stone Care products are known to be of high quality and they are manufactured in the USA. The research and development arm at MB Stone Care is well known for their extensive effort in finding new and innovative solutions to overcome the constant challenges faced in the natural stone industry.
This product comprises of a combination of specialty abrasives and catalysts that makes the art of marble polishing relatively easy to implement without the need of any power tools. MB-11 is designed for spot polishing very mild acid etch marks on polished marble, travertine, limestone and any other calcite-based stone.
This product is tough on dirt and grime at the same time designed to be gentle on sensitive stone surfaces. You can trust and use MB Stone Care products with full confidence. MB Stone Care solves problems.
A unique combination of specialty abrasives and catalysts from MB Stonecare that makes the art of marble polishing relatively easy to implement without the need of any power-tool. MB-11 is designed for spot polishing of most “water stains” or “rings” from polished marble, travertine and any other calcite-based stone.
Be certain to test product first on a spare tile or inconspicuous area for extra caution before use.
DIRECTIONS FOR USE: USE RUBBER GLOVES ALL THE TIME WHEN HANDLING PRODUCT. Apply a couple of pinches of powder on the dull spot to be restored and spread it evenly over approximately 2 square inches. Using a spray bottle spray a mist of water over the powder to moist it. Don’t make it too wet. Using a clean piece of terrycloth (a washcloth will do fine) rub the powder back and forth, using the heel of your hand (only a mild pressure is necessary), until the area treated is dry and shiny (it shouldn’t take more than a few strokes). Repeat if necessary. To finish with a “professional touch,” spray a bit more water, then, using the cloth with the area of it where the powder is stuck on the surface of the stone, rub in circles (with a little pressure), starting small and widening, then back, etc. until the stone surface is dry and shiny. This will make for a perfect blend.
For the final cleaning to eliminate any residue, spray a little of MB-5, Marble, Granite & More Spray Cleaner, then rub it dry.
WARNING! CAUSES EYES AND SKIN IRRITATION. KEEP OUT OF REACH OF CHILDREN. Avoid contact with eyes, bare skin and clothing. Wash thoroughly after handling.
FIRST AID: In case of contact, flush eyes immediately with plenty of water until irritation subsides. If irritation persists call a physician. Flush skin with tap water until clean. If swallowed do NOT induce vomiting. Drink plenty of water and call a physician. The product is not poisonous. Contains: Aluminum oxide, citric acid, potassium oxalate and other inert ingredients.
This highly concentrated product is designed to clean the toughest soils from tiles, grout and all natural stones.
It is a biodegradable, powerful cleaning agent, formulated with the latest cutting edge technology, to clean deep into your grout and any other treated surface effectively and easily.
MB-2 is not a rinse-free formula and must be thoroughly rinsed after cleaning.
Packing: 1 Litre Pack
Shipping Class: Non Dangerous Goods
An exclusive proprietary blend of abrasives and polishing agents that represents an industry first and a definite breakthrough to polish granite and most mercantile granites. Approximate coverage for one tub is 400 to 800 sq ft depending on the stone's properties. Once pad becomes saturated, the coverage increases
MB Stone Care MB-3 Soap Film and Mineral Deposit Remover is a product designed to get rid of unsightly and unsanitary soap film, scum, and hard water deposits effortlessly and without damaging the polished surface of your stone shower stalls. It works also great to clean the inside of that glass shower door from those hard-water deposits.
MB-3 IS HIGHLY EFFECTIVE AND SAFE ON MOST NATURAL MARBLE GLOSSY SURFACES. BE CERTAIN TO TEST PRODUCT FIRST ON A SPARE TILE OR INCONSPICUOUS AREA FOR EXTRA CAUTION BEFORE USE.
DIRECTIONS FOR USE:
SHOWER FLOOR, WALLS AND DOORS, WASH BASINS,
ETC. - Dilute MB-3 in a proportion of 1 to 2 with warm water. Liberally apply with
a sponge and allow to stand - without letting the solution dry - until the soap
scum begins breaking up. Scrub slightly with a scrub brush or plastic scouring
pad. Rinse thoroughly. Repeat process if necessary. Drying is not required. Use
rubber gloves to avoid contact to the skin.
WARNING! CAUSES EYE AND SKIN IRRITATION.
Keep out of reach of children.
Avoid contact with eyes, bare skin and clothing. Wash thoroughly after handling.
Natural stone mildew remover. Removes mildew stains and odor from granite and marble without damaging polished marble surfaces. Cleans mildew stains on contact without scrubbing. Just spray and watch mildew stains disappear within a few minutes!
Safe on most polished and natural marble surfaces. (For extra caution, test product on spare tile or inconspicuous area.)
Just 1 to 2 fl.oz. added to a gallon of warm or cold water and watch your polished or honed stone floor come alive! (Follow the directions on the back of the bottle.) Its pH balanced NO-RINSE formulation effortlessly cleans soil and grime, and dries with NO STREAKS!
Special inorganic salts in the formula act as moisturizers and optical brighteners, actually enhancing the shine of the floor or benchtop! The product is also excellent for wood floors, ceramic and porcelain tiles!
It works great for the maintenance of large commercial floors with automatic scrubbing machines, too!