Lithofin MN Colour-Intensifier
Lithofin MN Colour-Intensifier
Click here to Show DG Shipping Rates
Lithofin MN Colour-Intensifier
Colour Enhancing Penetrating Sealer
Lithofin MN Colour-Intensifier from the Lithofin-range for natural and engineered stones dramatically enhances the appearance of all types of natural stone paving, such as rough, absorbent natural and concrete stone surfaces.
Lithofin MN Colour-Intensifier will delicately enhance the colour and texture of the stone, whilst helping to protect against staining. Lithofin MN Colour-Intensifier strongly repels water, oil, and grease and allows the surface of the stone to breathe. Lastly, Stone Doctor Australia assures you that Lithofin MN Colour-Intensifier will restore all types of faded dark natural stones which is perfect for your stone paving.
Over time, any natural stone paving can begin to fade a little, depending on the conditions within your area and the use that your space has seen. As a natural product, this is totally normal and if the colour of your stone is more muted than you would like, you can apply colour enhancing product to intensify the natural tones of each slab resulting in a more vibrant palette of colours. Stone Doctor Australia works best in finding the best products like Lithofin MN Colour-Intensifier doubles up as a sealer which will help to protect your stone too!
Features of Lithofin MN Colour-Intensifier:
- Can be applied several times
- Ideal for concrete slabs and pavers
- Ready to use
- Non-gloss Effect
- For indoors and outdoors use
- Porous stones
- Protects against water-based stains only.
- Resealing will be necessary for external areas from time to time to upkeep the enhanced look.
* Cannot protect calcium-based materials from getting acid-etched i.e. marble, limestone, travertine, polished concrete, etc.
HOW TO USE
HOW TO USE
How to Use Lithofin MN Colour-Intensifier:
- The surface to be treated must be completely dry and clean.
- Always try the Lithofin MN Colour-Intensifier in an inconspicuous area prior to use.
- Evenly apply a consistent amount of Lithofin MN Colour-Intensifier with a clean brush, a roller or a cloth.
- On highly absorbent surfaces, this procedure may have to be repeated after five minutes.
- Lithofin MN Colour-Intensifier should saturate the stone without drying on the surface.
- Less absorbent surfaces may have to be toweled off.
- Attention! treat only completely dry surfaces (drying time for newly laid surfaces; up to 8 weeks; after rain or after cleaning: several days). Non-absorbent surfaces such as polished or fired materials such as porcelain or ceramic tiles can’t be treated. Glass, wood, plastics and other surfaces sensitive to solvents must be protected against splashes.
- Application Temperature: the temperature of the surface should be between 5°C and 25°C. Switch off under floor heating.
- Drying Time: safe to walk on after approx. 30 minutes, completely dry after 24 hours.
- Coverage: approx. 5 to 10 m²/L depending on the surface.
- Durability: indoors and with correct maintenance nearly unlimited. Outdoors, depending on the type of stone, the colour will remain for approx. 1 to 2 years, the protective effect for several years. Can be reapplied when the effect fades.
Safety
- Refer to the Safety Data Sheet (SDS) for Lithofin MN Colour-Intensifier before use.
Field of Use:
- For adding lustre to wall and floor surfaces, stairs, entrance areas, terraces, etc. which appear bland and colourless. Lithofin MN Colour-Intensifier is suitable for indoor and outdoor use
- Surfaces: all absorbent, porous natural stones (e.g. granite, gneiss, porphyry, marble, limestone, slate, etc.) and engineered stones with rough, sawn, honed and flamed surfaces.
- Please Note: for protecting polished and very finely honed natural and artificial stones, we recommend Lithofin Stainstop W or Lithofin MN Stain-Stop. On limestone use Lithofin MN Stain-Stop ECO.
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
| Brand |
Lithofin |
|
Consistency |
Liquid |
|
Colour |
Transparent |
|
Base Type |
Solvent |
|
Shelf Life |
3 years |
|
Storage |
18-25ºC |
|
Full Drying Time |
24 hours |
|
Coverage |
7 - 15m2 / Litre |
|
Shipping Class |
Dangerous Goods (Flammable) |
