A unique combination of specialty abrasives and catalysts from MN Stone Care that makes the art of marble polishing relatively easy to implement without the need of any power-tool. Mb-11 is designed for spot polishing of most “water stains” or “rings” from polished marble, travertine and any other calcite-based stone.
Be certain to test product first on a spare tile or inconspicuous area for extra caution before use.
DIRECTIONS FOR USE: USE RUBBER GLOVES ALL THE TIME WHEN HANDLING PRODUCT. Apply a couple of pinches of powder on the dull spot to be restored and spread it evenly over approximately 2 square inches. Using a spray bottle spray a mist of water over the powder to moist it. Don’t make it too wet. Using a clean piece of terrycloth (a washcloth will do fine) rub the powder back and forth, using the heel of your hand (only a mild pressure is necessary), until the area treated is dry and shiny (it shouldn’t take more than a few strokes). Repeat if necessary. To finish with a “professional touch,” spray a bit more water, then, using the cloth with the area of it where the powder is stuck on the surface of the stone, rub in circles (with a little pressure), starting small and widening, then back, etc. until the stone surface is dry and shiny. This will make for a perfect blend.
For the final cleaning to eliminate any residue, spray a little of MB-5, Marble, Granite & More Spray Cleaner, then rub it dry.
WARNING! CAUSES EYES AND SKIN IRRITATION. KEEP OUT OF REACH OF CHILDREN. Avoid contact with eyes, bare skin and clothing. Wash thoroughly after handling.
FIRST AID: In case of contact, flush eyes immediately with plenty of water until irritation subsides. If irritation persists call a physician. Flush skin with tap water until clean. If swallowed do NOT induce vomiting. Drink plenty of water and call a physician. The product is not poisonous. Contains: Aluminum oxide, citric acid, potassium oxalate and other inert ingredients.
PREMIUM GRADE SOLVENT BASE PENETRATING SEALER FOR ALL STONE TYPES
A special solvent base product from Lithofin for use on marble, all other natural stone types, terrazzo, engineered stone and also for concrete based products. It contains high quality water and oil resistant components based on alkoxysilanes.
Lithofin MN Stain-Stop penetrates into the surface and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed by the surface upon treatments. Does not change the appearance of the surface. For indoor and outdoor use. A huge maintenance aid.
Coverage: Approximately 7 - 15m2 / Litre
Packing: 5 Litres
Shipping Class: Dangerous Goods (Flammable)
Exceptional anti-stain product based on a unique formulation, it protects marble and granite stones from a wide range of stains. Bellinzoni Idea Gold is a premium nano sealer and has prolonged efficacy.
Transparent protective used for maximum protection of all stone surfaces against water penetration, oil, fats and moisture. Bellinzoni Idea Gold premium nano sealer works great even on shiny materials, allows the stone to breathe, blocks efflorescence, penetrates deep, does not alter the natural color of treated surface and does not create any film.
Spectacular “pearl effect”: water droplets on treated surface take shape of spheres, which glide away on sloping surfaces or immediately after an airblow.
Laboratory tests demonstrate the UV resistance of product, which has no color change even after prolonged exposure. It is perfectly invisible and leaves unchanged the original color of material. It prevents formation of mould.
This premium nano sealer has found its place globally and is much sought after by professional Stonemasons around the world. Created with ultra high technological advancements in Milan.