Aqua Mix High-Gloss Sealer
Aqua Mix High-Gloss Sealer
Aqua Mix High-Gloss Sealer
Achieve a Stunning High-Sheen Finish with Our Water-Based Blend of Acrylic Polymers
Get the Ultimate High-Gloss Finish with Aqua Mix High-Gloss Sealer - a Water-Based Blend of Acrylic Polymers That Provides Stain Resistance, Durability, and Moisture Vapor Transmission - Perfect for Indoor and Outdoor Applications.
If you are looking for a sealer that can provide a durable high-gloss finish without the need for a separate finish product, look no further than Aqua Mix High-Gloss Sealer. Its water-based blend of acrylic polymers is specially formulated to provide both a stain-resistant surface seal and a stunning high-sheen finish in one easy step.
Aqua Mix High-Gloss Sealer allows moisture vapor transmission and is unaffected by ultra-violet light, making it perfect for use in a wide range of indoor and outdoor applications. Plus, its easy-to-apply formula means you can achieve professional-quality results without the need for expensive equipment or professional help.
What sets Aqua Mix High-Gloss Sealer apart from other sealers on the market is its formula's ability to provide both stain resistance and a high-gloss finish in one easy step. Plus, its water-based blend of acrylic polymers is specially formulated for durability, ensuring your surfaces will stay looking their best for years to come.
So whether you are looking to protect your countertops, floors, or other surfaces, Aqua Mix High-Gloss Sealer is the ultimate solution. Choose from two convenient sizes - 946ml and 3.8L - and get ready to achieve a stunning high-gloss finish that will impress anyone who sees it. Upgrade your surfaces today with Aqua Mix High-Gloss Sealer and experience the ultimate in stain resistance, durability, and high-gloss finish.
If you have questions on Aqua Mix High-Gloss Sealer, please call us at 03-9429-1223 or start a live chat with one of our experts if you require expert assistance. We are happy to serve you and provide a comprehensive solution.
Key Features Of Aqua Mix High-Gloss Hardware Sealant:
- May be used as a pre-grouting sealer
- Allows moisture vapor transmission
- Safe to use, low odour, low VOC
- Is unaffected by ultra-violet light
- Last up to 3 years
HOW TO USE
HOW TO USE
For Use On
Unsealed, textured natural stone, textured porcelain tiles, clay pavers including Saltillo, terra-cotta and adobe, cement tile, quarry. Internal use only.Limitations
- Not recommended for use on smooth glazed ceramic or porcelain tile, as surface must be rough-textured to ensure adequate bonding.
- Do not allow product to come in contact with any non-recommended surface.
- Not recommended for use in or around pools, showers or areas subject to standing water.
- Not recommended for use on countertops.
- Keep surface clean and dry to reduce possibility of slip-fall accidents.
General Surface Preparation
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Surface should be dry, clean and free of waxes, sealers, or finishes. Do not apply directly over silicone sealers, oil or wax based finishes.
Aqua Mix® Sealer & Coating Remover will strip the surface and remove wax or old acrylic finishes. Place a few drops of water on various tiles. If water doesn’t penetrate, additional removal is necessary. New installations need to be dry at least 48 hours before application. Clay and Saltillo tile may require extended drying time depending on temperature and humidity. Make sure the tiles are completely dry before application. Test product in an inconspicuous area to ensure desirable results.
Application Of Product
Read entire label before using. For new installations sealer can be applied as soon as 48 hours after grouting. Surface must be clean, dry and free of existing sealers and coatings. Apply 2-3 coats of sealer with a clean dense sponge, brush or paint pad applicator in thin, even coats. Allow 30 minutes drying time between coats. Avoid puddling.
The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application.
Pre-Grouting Application
Apply over clean stone or tile a minimum of 2 hours prior to grouting – follow application procedures above.
Drying Time
- Ready for surface traffic 6 hours after final coat.
- Keep area dry for at least 12 hours.
- Achieves a full cure in 24 hours.
Cleaning Of Equipment
Clean tools with mineral spirits immediately after use
VOC Content:
Maximum VOCs: 51 grams per litre
Product Maintenance
General Maintenance Guide for surfaces sealed with a Topical / Coating Sealer
Safety:
Always read the label and follow directions for use. Kindly refer to the Safety Data Sheet (SDS) and Technical Data Sheet (TDS) before use.
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
Additional Information On Aqua Mix High-Gloss Sealer:
| Brand |
Aqua Mix |
|
Size |
946ml and 3.8L |
|
Type |
Liquid |
|
Appearance |
Milky White Liquid |
|
Odour |
N/A |
|
Storage |
Store in cool dry places |
|
Shipping Class |
Non-Dangerous Goods |