MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs)
MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs)
MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs)
A Wet To Dry Marble Polishing Powder That Is Formulated To Produce A Very High Gloss & Works Well As A Cleaning Agent In Getting Rid Of Sealers & Coatings From Granite Surfaces
MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs) yields a high shine (often higher than from the factory). Also, MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs) works very well on many "granites," including, but not limited to, Black Absolute, on floors and counters. Only professionals should use MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs).
MB12 Caliber Marble Polishing Powder – 1lb works well on marble, limestone, travertine, serpentine (green marble), onyx, ophicalcite, and terrazzo (0.45kgs). Also, MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs) is a great way to clean granite surfaces that have been coated or sealed.
When you combine MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs), the right pads, application patterns, and a polishing machine with the right weight and speed, magic happens. The purpose of MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs) is to provide shine, reflection, durability, and cost-effectiveness.
If you have questions about MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs), you should always ask a stone care expert.
Chat with us and get answers about this product. We are delighted to be of service!
Features of MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs):
- For professional use
- The wet or dry polishing process
- Great on all calcite-based stone & terrazzo
- Highly effective & reduces clean-up
- Perfect for residential, commercial, and industrial applications
HOW TO USE
HOW TO USE
How To Use MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs):
DIRECTIONS FOR USE: (The following are guideline directions. Different stones may require different techniques. If in doubt, don't hesitate to contact us.- Prepare your surface for polishing by completing the honing process, to the highest clarity possible for the best results.
- Mask/Protect surfaces that could potentially be damaged by splatters with proper masking material.
COUNTERTOPS:
- Target an area of approximately 2 - 3 sq. ft.
- Sprinkle ¼ teaspoon of MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs) on the surface to be polished in a circular pattern, slightly smaller than the polishing pad to be used.
- Using a spray bottle, add enough water to the powder to soak the powder.
- Use a white polishing pad with a right-angle grinder/polisher (variable speed is a MUST).
- Set the speed to low.
- Place pad on top of the powder mixture.
- While controlling the speed with the trigger and applying as much pressure as the machine can take, start spreading the slurry over the targeted area, keeping a very low RPM, until it’s almost dry.
- Pull the trigger all the way while gradually lightening the pressure and buff to a shine while moving the machine swiftly over the targeted area.
- Remove any streaking with a clean dry white pad and a mist of water.
FLOORS:
- Target an area of approximately 10 – 12 sq. ft. and sprinkle 1 tablespoon of MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs) in the center of the area in a circular pattern slightly smaller than the diameter of the floor machine.
- Using a spray bottle, add enough water to the powder to soak the powder.
- Using a hog’s hair pad and a floor machine with at least 1.5 hp and not exceeding 175 RPM, swiftly swing the machine side to side over the target area to evenly spread the product slurry.
- Then polish slowly with a spiral motion, moving from one end of the targeted area to the other and back until the slurry is dry and the stone surface becomes shiny.
- The first area will probably need to be done a couple of times for proper pad build-up.
- We suggest not exceedingly approx. 100 sq. ft. with one side of the pad.
- After that, flip the pad over and go another 100 sq. ft. or so (hogs hair pads can be hosed off a couple of times and reused, before disposal.)
- Remove any streaking with a clean dry hog’s hair pad and a mist of water.
NOTICE: The directions above are average. Different stones may require more or less powder and/or water; a faster or slower pace, according to their inner physical and chemical characteristics. MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs) can be considered as universal as they come, but it’s no substitute for professionalism.
COVERAGE: Depending on the type of stone, expect coverage of approximately 500 to 1,000 sq. ft. per pound.
Safety
- Refer to the Safety Data Sheet (SDS) before use of MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs)
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
Additional Information on MB12 Caliber Marble Polishing Powder – 1lb (0.45kgs)
| Brand |
MB Stone Care |
|
Consistency |
Powder |
|
Colour |
White |
|
Base Type |
Powder |
|
Storage |
Cool and dry places |
|
Coverage |
Approx. 500 to 1,000 sq. ft. per pound |
|
Shipping Class |
Non-Dangerous Goods |