MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs)
MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs)
MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs)
An Excellent Performer To Polish Darker Calcite-Based Stone Surfaces To A Deep-Gloss. For Professional Use Only
Different stones may need different treatments, and MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) is the best choice for polishing your marble surface to a deep gloss.
The MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) works well on dull, etched marble countertops and other surfaces. It is one of the most popular powders for polishing marble. Fine-grained and made in Italy, the MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) outperforms industry standards.
It is easy to use and gives a beautiful finish if you do it right.
Because marble is porous, it's easy for permanent etchings to form. With a little time and the marble polishing powder we recommend, like MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs), you can quickly restore the shine and natural beauty of your marble surface.
MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) swiftly polishes all calcite-based stones to a deep sheen, including Marble, Travertine, Onyx, Limestone, and others. Furthermore, MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) will not discolour grout lines. Stone Doctor Australia offers an incredible, reliable, and experienced team of specialists that can aid you with cleaning your marble surfaces.
MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) is only intended for professional usage.
If you have any questions about MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs), please contact our experts right away! We're always glad to help out.
Features of MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs):
- Easy to use
- For professional use only
- Highly efficient
- Produces superior finish
- Polishes quickly
- Will not stain grout lines
HOW TO USE
HOW TO USE
How To Use MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs):
Guidelines- Prepare the surface to be polished by honing it to the highest clarity possible.
- Protect surfaces that could be damaged by splatters with proper masking material.
FLOORS:
- Target an area of approximately 10 – 15 sq. ft.
- In the middle of the target area, sprinkle approximately 1 ½ - 2 oz. (3 – 4 tablespoons) of MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) powder in a circular pattern slightly smaller than the diameter of the floor machine.
- Using a hog’s hair pad (highly recommended), position the floor machine with a full tank of water on top of the powder.
- For best results, use 1.5 HP minimum and do not exceed 175 RPM.
- Release some water and swiftly swing the machine back and forth over the targeted area to evenly spread the slurry. (Note: keep the slurry thick; not too wet)
- Polish slowly with a spiral motion moving from one end of the targeted area to the other and back.
- Continue polishing for 2.5 – 4 minutes.
- Then check the surface with a squeegee.
- You should have a high polish at this point.
- Next release just enough freshwater onto your target area to make vacuuming the used slurry easy and vacuum to remove.
- Then clean with a neutral cleaner such as MB1 Floor Amore – 946ml or MB15 Stone Glow.
- Now repeat this process in the next section.
COUNTERTOPS
- Target an area of approximately 3 – 4 sq. ft.
- On the targeted surface, sprinkle 1/2 teaspoon of the MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) on the surface to be polished in a circular pattern slightly smaller than the polishing pad you are using.
- Spray some water on the powder and over the rest of the targeted area.
- Set the speed of the right-angle grinder/polisher (variable speed is a MUST) to the slowest speed.
- Using a hog’s hair pad, move the machine over the targeted area slowly, applying steady pressure.
- Check the surface for results after approximately 2 - 3 minutes.
- If you have a high polish, semi-flush the section and pull the slurry down to the next section, and repeat.
COVERAGE: Depending on the type of stone, expect coverage of MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs) is approximately 125 – 200 sq. ft. per pound.
Safety
- Refer to the Safety Data Sheet (SDS) before use of MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs)
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
Additional Information on MB18 Ultra 5 Marble Polishing Powder – 1lb (0.45kgs):
| Brand |
MB Stone Care |
|
Consistency |
Fine Powder |
|
Colour |
White |
|
Base Type |
Fine Powder |
|
Storage |
Cool and dry places |
|
Coverage |
Approximately 125 – 200 sq. ft. per pound |
|
Shipping Class |
Non-Dangerous Goods |
