How To Use MB20 Premium Granite Polishing Cream – 1kg:

Countertops:

1. Always make sure proper masking of the work area is utilized to protect surfaces that could be splattered by the product.
2. Wear safety glasses and gloves
3. Make sure the surface is free of any coatings, waxes, sealers, grease, and/or soil.
4. If the surface requires honing, use quality diamond pads and hone the surface to at least 1000 grit or higher predicated upon the clarity of the stone.
5. With your variable speed, a right-angle grinder (a must-have) attaches a pad driver and a hog’s hair pad and sets the speed to mid-range.
6. Use about a ½ teaspoon per sqft (remember the amounts will vary) of product and a small amount of water (1/2 tablespoon).
7. Target a 2 sqft area and place the product in the center of your surface.
8. Place your machine and hog’s hair pad directly on top of the product and water.
9. Starting slowly, spread the product out controlling the trigger while applying pressure attempting to dry out the product.
10. As the MB20 Premium Granite Polishing Cream – 1kg dries, increase the speed while moving the machine swiftly over the targeted area.
11. The use of pressure will vary depending on the stone but generally, some pressure can be applied.
12. Check your results and repeat if needed.
13. Remove any streaks or swirl marks using a white pad with a mist of water.
14. Adjust the amount of MB20 Premium Granite Polishing Cream – 1kg you are using and continue.

Floors:

1. Always make sure proper masking of the work area is utilized to protect surfaces that could be splattered by the product.
2. Wear safety glasses and gloves.
3. Make sure the surface is free of any coatings, waxes, sealers, grease, and/or soil.
4. If the surface requires honing, use quality diamond pads and hone the surface to at least 1000 grit or higher predicated upon the clarity of the stone.
5. Target an area of approximately 1m2
6. Place MB20 Premium Granite Polishing Cream – 1kg in the center of your target area using 2 tbsp of product, spray with enough water to wet the product so you get a semi-thick slurry that will not produce splatter.
7. Place your floor machine with a hog’s hair pad on top of the product and begin to spread it out over your target area.
8. Work the product until the slurry dries out and the stone becomes polished.
9. The pad should be flipped over every 5 - 10m2
10. A floor machine with a strong motor over 1.5 HP and a weight of about 60kgs will perform and produce the best results.

These Directions are a baseline guide to using this product as it may require different techniques for different stones. If in doubt don’t hesitate to contact us.

Safety

• Refer to the Safety Data sheet (SDS) before use of MB20 Premium Granite Polishing Cream – 1kg

Additional Information on MB20 Premium Granite Polishing Cream – 1kg: