• Always Try the product in an inconspicuous area first.
• Working in small areas (10 to 15m²) apply product generously and evenly until the surface appears wet.
• On dense stones, keep the wet between 5-15 minutes and ensure even distribution.
• Do not allow to dry on the surface if not being absorbed into the stone.
• On highly absorbent stones, keep wet between 5-15 minutes and ensure even distribution. Within 1 hour, repeat the process up to four times, depending on the absorbency of the stone.
• Completely remove all the excess, do not allow to dry on the surface.
• Immediately check the whole surface for an even finish.
• Allow to dry for 1 to 2 hours.
• Non-absorbent surfaces cannot be impregnated.
• Glass, ceramics, wood and other surfaces sensitive to solvents must be protected against splashes.
• Application temperature: 10⁰C and 25⁰
• Do not work under direct sunlight, and turn off under floor heating.
• Surfaces are safe to use after several hours. Complete effectiveness of the treatment will take approx. 5 days.

Safety

• Refer to the Safety Data sheet (SDS) before use
• Test in a small, hidden, area before the main application
• Keep away from heat and humidity
• Keep away from direct sunlight
• Use in a well-ventilated area

Field of Use

• For invisible protection against staining and for facilitating maintenance of all-natural stone surfaces, including polished marble.
• Perfect for use on wall and floor surfaces in the kitchen and bathroom, as well as on table tops, window sills and other sensitive surfaces.
• Suitable for indoor and outdoor use.
• Note: All natural stones will remain sensitive to acidic liquid.