Lithofin Resin-Ex - 1 Litre
Lithofin Resin-Ex - 1 Litre
Click here to Show DG Shipping Rates
Lithofin Resin-Ex - 1 Litre
A Premium & Highly Effective Special Stripping Gel For Removing Epoxy Grout Materials & Residues From Rough Natural & Engineered Stone Surfaces
Lithofin Resin-Ex – 1 Litre eliminates all epoxy-grout residues and other imperfections such as resins, sealants, oil and grease deposits, paint (graffiti), plastic residues, and so on. It is best suited for ceramics as well as any rough natural and engineered stones.
This Lithofin Resin-Ex - 1 Litre is composed of acidic reactive chemicals and highly active organic solvents. Also, the Lithofin Resin-Ex – 1 Litre can be used in place of (hazardous and ecologically destructive) CFC-based cleaning chemicals in many circumstances. Lithofin Resin-Ex – 1 Litre penetrates various organic compounds and dirt deposits, dissolving them from the surface. The gel-like consistency makes application easier.
Note: Lithofin Resin-Ex - 1 Litre should NOT be used on acid-sensitive materials with fine, honed, polished, or antiqued surfaces.
Features of Lithofin Resin-Ex - 1 Litre:
- Leaves No Residues
- Gel-Like, Easy To Use
- Highly Effective
HOW TO USE
HOW TO USE
How To Use Lithofin Resin-Ex - 1 Litre:
Directions for Use- Test the product prior to use.
- Always apply to a dry surface.
- Protect the surface from wetness during the working time because water represses the effectiveness.
- Application-/surface temperature: 10 - 30°C.
- The mentioned working times are shorter at higher temperatures and longer at colder temperatures.
Directions to remove pavement fixing mortar
Generously apply to the dry surface using a brush or a scrubber. Allow working for up to approx. 30 min. at room temp. of about 20°C. Then add water (best if diluted 1:10 with Lithofin MN Power-Clean) and brush. Afterward, rinse and brush. Always brush diagonally to grouts. Rinse the surface again with water. In case of any leftovers, repeat when the surface is dry. Coverage: up to approx. 5 m²/L, depending on dirt.
Directions to remove epoxy resin (2K) mortar
Generously apply to the dry surface using a brush or a roller. Allow working for approx. 2 hrs. at about 20°C. Then use a rough pad (ex. green pad for glazed tiles) to work through. Add water and continue to scrub. Remove excess fluid and rinse with water immediately. Coverage: up to approx. 20 m²/L on glazed tiles
Safety:
Refer to the Safety Data Sheet (SDS) for Lithofin Resin-Ex - 1 Litre before use.
Note: Kindly refer to the Technical Data Sheet (TDS) for Lithofin Resin-Ex - 1 Litre for complete details. The above consist of important extracted information only and not all.
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
Additional Information on Lithofin Resin-Ex - 1 Litre:
| Brand |
Lithofin |
|
Product Type |
Acid and Solvent Based Cleaner |
|
Colour |
Whitish, Dimish, Gel Like |
|
Material Suitability |
Bluestone, Concrete, Granite, Limestone, Marble, Neolith, Onyx, Porcelain & Ceramic, Quartzite, Sintered Stone, Travertine |
|
Odour |
Slightly Pungent |
|
Coverage |
approx. 5m²/L |
|
Packaging |
1 Liter |
|
Shelf Life |
2 Years |
|
Shipping Class |
Dangerous Goods |
