(4" DIAMOND BRUSHES) SDA FIDIFLEX D.100 CH+M14
$99.00
Brush for aging | brushed finish with diamond wire in a 4" circular M14 tool.
(4" SILICON CARBIDE BRUSHES) SDA TYFLEX D.100 CH+M14 - ITALY
$76.00
Use our top Italian quality 4" Silicon Carbide Brushes to create an aging effect | brushed finish with a unique silicon carbide - nylon wire matrix specially designed for use with a handheld 4" circular M14 power tool for altering the physical properties of softer natural stone types.
These 4" silicon carbide brushes are suitable for use on marble, limestone, travertine, dolomite, etc..
Speak to one of our technicians if further information is required on how to use these 4" silicon carbide brushes effectively. Available in 6 different grits.
Delivery: Min 2 weeks from receiving any orders.
Stonelux Eco Toolbox - 1 Set
$475.20
Stonelux Eco Toolbox - 1 Set
StoneLux Eco is a new, cost effective repair kit for one-off repairs and a great introduction into the world of StoneLux. With StoneLux Eco, you can achieve high quality repairs on scratches, chips and also installation/machining defects.
StoneLux ECO Toolbox [contents]
3 Repair Colours, 1 Bonding Pen, ECO lUx curing light, scraper blade, abrasive paper.
5 Minute curing time.
Other Available Stone Lux Products Are:
Stonelux Compacc
Stonelux Professional
Stonelux Consumables:
Stonelux Primer Pen
Stonelux Filler Colours
Stonelux Compacc Toolbox - 1 Set
$3,662.30
Stonelux Compacc Toolbox - 1 Set
StoneLux Compacc enables you to keep your start-up costs at a minimum whilst offering you a wide range of options to choose from. The StoneLux components are fully coordinated with each other. They can be mixed with each other and they can be purchased as part of a kit or individually.
StoneLux compacc Toolbox [contents]
3 Repair Colours, 3 x sets of repair crystals, 1 bonding pen, finishing accessories,
TWINLUX curing light. 1 Minute curing time.
Other Available Stone Lux Products Are:
Stonelux Eco
Stonelux Professional
Stonelux Consumables:
Stonelux Primer Pen
Stonelux Filler Colours
Stonelux Professional Toolbox - 1 Set
$5,445.00
Stonelux Professional Toolbox - 1 Set
The StoneLux professional toolbox contains all the components to effect fast high-quality repair work – from preparing and repairing the damage to finishing the repaired surface. A comprehensive, fully integrated assortment for the repair of marble, granite and engineered stone including all basic colours, all sizes of crystals and a Pyrosil torch for the repair of marble surfaces.
StoneLux professional Toolbox [contents]
10 repair colours, 6 x sets of repair crystals, 2 bonding systems, finishing accessories, TWINLUX curing light.
1 Minute curing time.
Other Available Stone Lux Products Are:
Stonelux Eco
Stonelux Compacc
Stonelux Consumables:
Stonelux Primer Pen
Stonelux Filler Colours
Stonelux Cleaning Solution
PVC Stonemason Apron - 1 Pc
$33.60
PVC Stonemason Apron - 1 Pc
90 x 120cm long PVC apron
• Provides good abrasion resistance
• Offers some chemical resistance
• Flexible, light and tough
• One size fits all
• Sold and packaged individually
Note 1: Colours Available: Blue, White & Black
Note 2: Carton Quantity Of 12 Pcs Is Also Available
Arm Sleeves Long (ARAX) - 1 Sleeve
$33.60
Arm Sleeves Long (ARAX) - 1 Sleeve
• Thumb slot to minimise movement and increase wrist protection
• Provides outstanding abrasion, cut and tear capabilities in handling dry, wet or greasy parts
NOTE: AVAILABLE IN CARTON QUANTITY OF 12 SLEEVES
Pentel Correction Pen - 1 Pc
$9.80
Pentel Correction Pen - 1 Pc
Marking Pen
Also Available In A Carton Pack Of 12 Pcs
Manta Aluminium Portable Saw - 1 Unit
$6,789.80
Manta Aluminium Portable Saw - 1 Unit
Robust & accurate portable saw featuring linear bearings on chrome plated bars, 45º bridge tilt, intergrated water tank with recirculation pump & folding legs.
Can be used for the following materials:
Bluestone, Concrete, Engineered Stone, Glass, Granite, Limestone, Marble, Neolith, Onyx, Porcelain & Ceramic, Quartzite, Sintered Stone, Travertine
Max Blade Diameter: 350mm
Max Cutting Thickness: 110mm
Motor: 2.2kw, 230V
RPM: 2800
Weight: 79kgs
Warranty: 12 months
RECOMMENDED BLADES:
Diarex UCS 300mm
Diarex UCS 350mm
(FOR ULTRA COMPACT SURFACES - NEOLITH, PORCELAIN & CERAMIC, SINTERED STONE)
Diarex TGB 300mm
Diarex TGB 350mm
(FOR GRANITE & OTHER STONE TYPES)
Diarex Waterfall Setting Tool - 1 Set
$1,393.00
Diarex Waterfall Setting Tool - 1 Set
- 90 Degree Waterfall Setting tool
- Heavy duty construction suitable for full size waterfall mitres.Twin ratchet system
- 6 points of adjustment
- 200mm vacuum cups with metal bodies and brass pumps
- Quick vacuum release lever and tab for easy removal
- Indicator for loss of pressure
- Non-marking nylon feet
NOTE: ALSO AVAILABLE IN CARTON QUANTITY OF 2 SETS
Diarex SeamSet2 Joint Aligning & Leveling Tool - 1 Set
$816.80
Diarex SeamSet2 Joint Aligning & Leveling Tool - 1 Set
With an Easy-to-use ratchet system, the Diarex SeamSet2 pulls benchtops into position to achieve perfect joins. 200mm vacuum cups. Two leveling points eliminate lippage.
NOTE: ALSO AVALABLE IN CARTON QUANTITY OF 4 SETS
Omni Cubed Pro-Cart - 1 Unit
$2,558.20
Omni Cubed Pro-Cart - 1 Unit
The Pro-Cart AT1 is designed to overcome the challenges of moving stone over curbs, stairs, and other rough terrain such as gravel or lawns. The cart easily and safely transports large and cumbersome stone, reducing the physical burden on workers. Integrated clamps and high ground clearance allow popping wheelies or climbing stairs with stone attached, taking the dread out of those challenging installation sites. The cart is equipped with 8″ non-marking, flat-free tires that last longer and are more reliable than pneumatic tires. Strong aluminum tubing makes this cart lightweight and highly durable. The Pro-Cart AT1 is extremely stable, easily maneuverable, and can be operated by a single person in many cases. The AT1 can accommodate a 340kg load, yet weighs less than 23kgs.
Use with the Aqua-Jaw™ Carry Vise™ and a Sink Hole Saver™ for the ultimate installation kit!
- Easily and safely transports heavy stone
- Reduces strain and risk of injury
- Clamps onto stone to cross any terrain
- Designed to easily clear and rest on stair treads
- 8″ non-marking, flat-free, shock absorbing tires
- Folding Kit (sold separately) collapses cart to under 25cm wide
- Multi-Top Accessory and Tool Tray Accessory available (sold separately)
Diarex Sink Anchor Kit. Adhesive Bonded Kit of 6 Anchors / Kit
$27.80
Diarex Sink Anchor Kit. Adhesive Bonded Kit of 6 Anchors / Kit
No-Drill Steel sink anchors adhere to underside of countertops for secure sink installations. Ideal for use with Integra Composite Bonder. Low profile.
NOTE: CARTON QUANTITY OF 16 x 6 ANCHORS KITS ARE ALSO AVAILABLE
Diarex Triple-Cup Vacuum Lifter - 1 Unit
Sold Out
Diarex Triple-Cup Vacuum Lifter - 1 Unit
Triangular formation allows even distribution of pressure to reduce strain on material.
NOTE: ALSO AVAILABLE IN CARTON QUANTITY OF 6 UNITS
Diarex Twin-Cup Vacuum Lifter - 1 Unit
$84.20
Diarex Twin-Cup Vacuum Lifter - 1 Unit
Universal suction lifter for handling all kinds of loads.
Please Note: Load Capacity 60kg vertically, 80kg horizontally.
NOTE: ALSO AVAILABLE IN CARTON QUANTITY OF 6 UNIT
Diarex 8” Vacuum Lifter With Hand Pump - 1 Unit
$200.50
Diarex 8” Vacuum Lifter With Hand Pump - 1 Unit
200mm single vacuum cup with 100kg (GS 65kg*) lifting capacity. Full metal handle with brass pump.
• Includes protective carry case and cover
• All-metal handle/pump assembly with flat pad for flat surfaces
• Vacuum leakage indicator with suction quick release button
*Safety factor is 2 under GS (German Safety) requirements.
NOTE: ALSO AVAILABLE IN CARTON QUANTITY OF 6 UNITS
Diarex Stone Carry Clamps - 1 Pair
$538.40
Diarex Stone Carry Clamps - 1 Pair
Used in pairs these clamps allow two people to handle stone panels with ease. [sold as pair]
NOTE: ALSO AVAILABLE IN CARTON QUANTITY OF 6 PAIRS
(D) Bessey F Clamps
$29.10
Bessey F Clamps
• Ideal for clamping laminations.
• 2K composite handle with comfort insert.
• Profiled rail is extremely rigid.
• Standard pads are field replaceable
• Malleable cast jaws feature corrugated design for strength and durability.
Aardwolf 3-Wheel Trolley - 1 Unit
$1,088.40
Aardwolf 3-Wheel Trolley - 1 Unit
Ideal for moving kitchen tops, stone, glass and other heavy work pieces onto work site. Large pneumatic wheels plus 140mm swivel caster at front that increases stability.
- Grips material automatically and securely
- Clamping supports and base are rubber padded
Diarex Water Swivel - 1 Unit
$196.10
Diarex Water Swivel - 1 Unit
12mm straight shank and 10mm female fitting with grub screws.
Note: Available In Carton Quantity Of 6 Units
Montolit Masterpiuma Evo 3 - 93cm
$1,476.75
Montolit Masterpiuma Evo 3 - 93cm
Multifunction, Power and Precision are the main features of this innovative Tile Cutter. 100% Made in Italy. Masterpiuma is the lightest among professional tile cutters.
This range of super-professional manual tile cutter can cut all types of tile, with thickness of 0-22 mm, quickly and accurately.
Thanks to the large protractor square, even diagonal cutting is safe and simple.
- Engineered for easy cutting all types of available ceramics, porcelain and glass tiles, including glass mosaic.
- Accurate and extremely powerful ergonomic push scrib handle. Recognized as the most effective lever on the tile cutter market.
- The self adjustable patented scoring system facilitates and consistently speeds up the cutting and splitting process on every different thickness and material, either porcelain, ceramics or glass.
- Set-up, transport and storage are quick and easy, thanks to the patented foldable design. This professional snap tile cutter doesn’t need to be dismantled.
Note: Smaller Model Is Also Available. Masterpiuma Evo 3 63cm
Montolit Masterpiuma Evo 3 63cm - 1 Unit
$1,117.60
Montolit Masterpiuma Evo 3 63cm - 1 Unit
Multifunction, Power and Precision are the main features of this innovative Tile Cutter. 100% Made in Italy. Masterpiuma is the lightest among professional tile cutters.
This range of super-professional manual tile cutter can cut all types of tile, with thickness of 0-22 mm, quickly and accurately.
Thanks to the large protractor square, even diagonal cutting is safe and simple.
- Engineered for easy cutting all types of available ceramics, porcelain and glass tiles, including glass mosaic.
- Accurate and extremely powerful ergonomic push scrib handle. Recognized as the most effective lever on the tile cutter market.
- The self adjustable patented scoring system facilitates and consistently speeds up the cutting and splitting process on every different thickness and material, either porcelain, ceramics or glass.
- Set-up, transport and storage are quick and easy, thanks to the patented foldable design. This professional snap tile cutter doesn’t need to be dismantled.
Note: Bigger Model Masterpiuma Evo 3 93cm Is Also Available
Montolit Flash Line Cutting System - 1 Set
$1,548.80
Montolit Flash Line Cutting System - 1 Set
Key Features:
- Non-slip system
- Quick connection
- Integrated lubrication
- Quick change of the cutting wheel
- International patent
- 100% MADE IN ITALY
Kit Contains:
- 3 x 1200mm bars
- 1 x Splitting device
- 1 x Cart with cutting wheel
- 1 x Transportation bag
Maximum Cutting Thickness: 10mm
Maximum Length: 3.4m
Montolit Corner Protectors Type B - (12mm - 4 Pcs)
$83.20
Montolit Corner Protectors Type B - (12mm - 4 Pcs)
Corner protectors to suit tiles with thickness up to 12mm
When dealing with large format tiles, it is often challenging to keep the corners safe.
This patented system, by Montolit, is able to absorb shocks that could damage or chip the material.
Made of a strong, wear resistant plastic that can be reused over and over again.
NOTE 1: AVAILABLE IN A CARTON PACK OF 24 PCS
NOTE 2: ALSO AVAILABLE FOR CORNER PROTECTION OF 6MM SLABS
Richmond VIC 3121
Phone: 03-9429 1223
E: admin@stonedoctor.com.au
Sign up to get the latest on sales, new releases and more …